6 Extension lines & 2 Analogue trunk Line EPABX System

The MATRIX VISIONPRO206 is a Digital Private Branch Exchange (PBX) system that supports 2 trunk lines and 6 analog extensions. This configuration is particularly suited for small offices or businesses that require a reliable and efficient telecommunication system without the complexity and expense of larger setups. The VISIONPRO206 system ensures seamless internal communication and effective management of external calls, enhancing overall productivity and customer satisfaction.

Key Features

1. Digital Switching:

The MATRIX VISIONPRO206 employs PCM/TDM digital switching, ensuring 100% non-blocking communication. This technology facilitates clear and uninterrupted voice transmission, a critical feature for any business communication system.

2. Advanced Processor:

Powered by a 16-bit Digital Signal Processor (DSP), the VISIONPRO206 ensures fast and efficient processing of communication tasks. The DSP enhances the system's capability to handle multiple calls simultaneously, maintaining high performance and reliability.

3. Versatile Signaling and Dialing:

The system supports both Loop Start signaling and DTMF and Pulse dialing (10/20 PPS). This versatility allows it to be compatible with a wide range of telecommunication devices and services, ensuring flexibility and ease of use.

4. Robust Off-Hook Specifications:

With an off-hook AC impedance of 600/900/Complex and a maximum off-hook current of 39mA, the VISIONPRO206 is designed to handle various telecommunication scenarios efficiently. The loop limit of 1800Ω (excluding telephone) further ensures reliable performance even in extended line conditions.

5. Superior Audio Quality:

The VISIONPRO206 boasts exceptional return loss (>18dB) and longitudinal balance (>50dB), contributing to superior audio clarity and minimal interference. Transmission levels can be adjusted with a Tx Gain of -12dB to +6dB and an Rx Gain of -12dB to +6dB, allowing for optimal audio quality settings based on specific needs.

6. Efficient Ringing and Caller ID:

The system supports both trapezoidal (50VRMS/25Hz) and sinusoidal (52VRMS/25Hz) ringing types, with a REN value of 3. Caller ID presentation is facilitated through DTMF, FSK ITU-T V.23, and FSK Bellcore 202, ensuring compatibility with various caller ID systems.

7. Enhanced Protection:

Over voltage secondary protection safeguards the system from potential electrical damage, ensuring longevity and reliability.

8. Physical and Environmental Specifications:

The VISIONPRO206 features a compact design with dimensions of 23.1x16.25x5.5cm and a unit weight of 0.65 kg. It is designed for wall mounting, making it easy to install in any office environment. The system operates efficiently within a temperature range of 0°C to 45°C and can handle up to 95% relative humidity, non-condensing.

Technical Specifications

The MATRIX VISIONPRO206 is packed with technical features that ensure high performance and reliability. Here are the detailed specifications:

• Type of Switching: PCM/TDM, Digital Switching, 100% Non-blocking

• Processor: 16-bit DSP

• Signaling: Loop Start

• Dialing: DTMF and Pulse (10/20PPS)

• Off-Hook AC Impedance: 600/900/Complex

• Off-Hook Current: 39mA Max.

• Loop Limit: 1800Ω Max (Excluding Telephone)

• On-Hook Voltage (Tip/Ring): -48V nominal

• DTMF detection: ITU-T Q.24

• Return Loss: >18dB

• Longitudinal Balance: >50dB

• Transmission Level Adjust: Tx Gain: -12dB to +6dB, Rx Gain: -12dB to +6dB

• Ringing: Trapezoidal 50VRMS/25Hz and Sinusoidal 52VRMS/25Hz

• REN: 3

• CLI Presentation: DTMF, FSK ITU-T V.23 and FSK Bellcore 202

• Protection: Over Voltage Secondary Protection

• Physical Connector: 2.54mm Push Type connector

CO (Central Office)/Two-Wire Trunk (TWT):

• Signaling: Loop Start

• Loop Limit: 1200Ω

• Off-Hook AC Impedance: 600/900/Complex

• Pulse Dialling: 10/20 PPS

• Dialling and Receiving using DTMF: ITU-T Q.23 and Q.24

• Return Loss: >18dB

• Longitudinal Balance: >50dB

• Transmission Level Adjust: Tx Gain: -15dB to +10dB, Rx Gain: -15dB to +10dB

• CLI Reception: FSK Bellcore 202, DTMF, and FSK ITU-T V.23

• Call Maturity: Delay and Polarity Reversal

• Physical Connector: 2.54mm Push Type connector

Power and Physical Specifications:

• Input: External Adapter 12V@2A for VISIONPRO 206, 308, 412

• Dimensions (WxHxD): 23.1x16.25x5.5cm (10.5"x11.2"x3.1")

• Unit Weight: 0.65 kg (1.43lbs)

• Shipping Weight: 3.5 kg (7.7lbs)

• Installation: Wall Mount

• Operating Temperature: 0°C to 45°C (+32°F to +122°F)

• Operating Humidity: 95% RH, Non-Condensing

Benefits of MATRIX VISIONPRO206 EPABX System

1. Cost-Effective Solution:

The VISIONPRO206 offers a cost-effective telecommunication solution for small to medium-sized businesses. With its efficient design and robust features, it reduces the need for expensive telecommunication infrastructure.

2. Ease of Use:

The system’s user-friendly interface and versatile signaling options make it easy to integrate with existing telecommunication setups. This reduces the learning curve and allows businesses to quickly adopt and utilize the system.

3. Reliability:

With advanced protection mechanisms and high-quality components, the VISIONPRO206 ensures reliable performance, minimizing downtime and ensuring continuous communication.

4. Flexibility:

The ability to adjust transmission levels and compatibility with various dialing methods provides businesses with the flexibility to tailor the system to their specific needs.

5. Compact Design:

The compact and lightweight design allows for easy installation and maintenance, making it suitable for offices with limited space.