Garden Speaker Two-Way 5.25 inch (135mm) Coaxial Mushroom Landscape Speaker

Frequency Range (-10dB)

55 Hz – 18 kHz

Power Rating

160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs)

Transformer Taps

70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W

Frequency Response (±3 dB)

65Hz - 16 kHz

Maximum Input Voltage

23.3 V

Sensitivity

86 dB, 1W @ 1m (ave. 80Hz - 16kHz)

Coverage Pattern

360° H, 160° V (primary listening 10° to 50° up from ground)

Directivity Factor (Q)

2.2

Directivity Index (DI)

3.4 dB

Maximum SPL (1m)

105 dB

Impedance

8Ω (at 8Ω setting)

Insertion Loss

<1.0 dB at any tap setting

Thru Setting

8Ω nominal

Crossover Type

2nd Order LPF on LF and 2nd Order HPF on HF

Recommended Protective High-Pass

65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct

LF Driver

LF: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
HF: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.

Enclosure

LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.

Grille

Powder coated stainless steel.

Outdoor Capability

IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.

Safety Agency

UL1480, Transformer UL Recognized per UL1876, ROHS compliant.

Input Connectors

Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).

Wiring

Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).

Colors

Hunter Green, RAL6018

Dimensions (H x W x D)

432 x 291 x 291mm (17 x 11.5 x 11.5 in.)

Net Weight (each)

5.5 kg (12 lb)

Shipping Weight

7.3 kg (16 lb)

Included Accessories

(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver

Installer-Supplied Required Tools

22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

Optional Accessories

22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.