|
Frequency Range (-10dB)
|
55 Hz – 18 kHz
|
|
Power Rating
|
160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs)
|
|
Transformer Taps
|
70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W
|
|
Frequency Response (±3 dB)
|
65Hz - 16 kHz
|
|
Maximum Input Voltage
|
23.3 V
|
|
Sensitivity
|
86 dB, 1W @ 1m (ave. 80Hz - 16kHz)
|
|
Coverage Pattern
|
360° H, 160° V (primary listening 10° to 50° up from ground)
|
|
Directivity Factor (Q)
|
2.2
|
|
Directivity Index (DI)
|
3.4 dB
|
|
Maximum SPL (1m)
|
105 dB
|
|
Impedance
|
8Ω (at 8Ω setting)
|
|
Insertion Loss
|
<1.0 dB at any tap setting
|
|
Thru Setting
|
8Ω nominal
|
|
Crossover Type
|
2nd Order LPF on LF and 2nd Order HPF on HF
|
|
Recommended Protective High-Pass
|
65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
|
|
LF Driver
|
LF: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround. HF: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
|
|
Enclosure
|
LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
|
|
Grille
|
Powder coated stainless steel.
|
|
Outdoor Capability
|
IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
|
|
Safety Agency
|
UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
|
|
Input Connectors
|
Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
|
|
Wiring
|
Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).
|
|
Colors
|
Hunter Green, RAL6018
|
|
Dimensions (H x W x D)
|
432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
|
|
Net Weight (each)
|
5.5 kg (12 lb)
|
|
Shipping Weight
|
7.3 kg (16 lb)
|
|
Included Accessories
|
(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
|
|
Installer-Supplied Required Tools
|
22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
|
|
Optional Accessories
|
22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
|
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent